Saturday, July 31, 2010

Meaning of name: John

email post
Meaning of name: John

JOHN
Origin: English
Gender: Masculine
Usage: English, Biblical
Pronounced: JAHN 

English form of Iohannes, the Latin form of the Greek name Ιωαννης (Ioannes), itself derived from the Hebrew name יוֹחָנָן (Yochanan) meaning "YAHWEH is gracious". This name owes its popularity to two New Testament characters, both highly revered saints. The first was John the Baptist, a Jewish ascetic who was considered the forerunner of Jesus Christ. The second was the apostle John, who was also traditionally regarded as the author of the fourth Gospel and Revelation.
This name was initially more common among Eastern Christians in the Byzantine Empire, but it flourished in Western Europe after the First Crusade. In England it became extremely popular: during the later Middle Ages it was given to approximately a fifth of all English boys.
The name (in various spellings) has been borne by 21 popes and eight Byzantine emperors, as well as rulers of England, France, Sweden, Denmark, Poland, Portugal, Bulgaria, Russia and Hungary. It was also borne by the poet John Milton (1608-1674), philosopher John Locke (1632-1704), American founding father and president John Adams (1735-1826), and poet John Keats (1795-1821). Famous bearers of the 20th century include author John Steinbeck (1902-1968), assassinated American president John F. Kennedy (1917-1963), and musician John Lennon (1940-1980).

Autopager vs Fastestfox

email post
I found that, there is some amount of people looking for opinion of compare Autopager and Fastestfox recently.

It is a actual very simple Question. If you are a Advanced computer user or a developer, you should use Autopager or autopager lite for lighter resource usage. Of course, Autopager takes some time to learn and it is not easy. However, it is really powerful weapon tool for developer.

On the other hand, if you are home user, I probably suggest you to use Fastest fox which is a very simple plugin for Firefox and SeaMonkey.

Press

News Alert - Twister reported near Sundre, Alta.

email post




News Alert

Twister reported near Sundre, Alta.


A suspected tornado is reported to have touched down Friday about 25 kilometres west of Sundre, Alta., says Environment Canada.

News Alerts - Pickton verdict stands, no new trial

email post
News Alert
Pickton verdict stands, no new trial

Robert William Pickton will not get a new trial for murdering six women in British Columbia, the Supreme Court of Canada has ruled.




Friday, July 30, 2010

Don't Trust the News?

email post
A new community of expert and amateur readers grades the news as it happens...
How can you be sure that the news you see and hear is true? Are there any journals and journalists that you can really trust and rely on? If so, how can you find them amidst the clangor and the clutter?

Win7RescuePE , Build a Win7PE RescuePE

email post

 Win7RescuePE:  Build a Win7PE RescuePE
Build a Win7PE RescuePE
Detailed build tutorial: Creating-Win7RescuePE word document

---------------------------------------
EDIT by psc:
The server domain is lost by some circumstances. But here is an old copy of the tytorial: Creating%20Win7RescuePE.doc
EDIT end
---------------------------------------

IMPORTANT: new win7PERescue server is rescue.w07.net , add rescue.w07.net/Projects to your server list

Winbuilder.exe

Direct download is available Here:


[Firefox] BetterPrivacy 1.48

email post
BetterPrivacy 1.48
Using a Firefox version older than 3.5?
Then get the compatible BetterPrivacy version 1.38 from here


Super-Cookie Safeguard (protects from LSO Flash Objects, DOM Storage Objects).
Better Privacy serves to protect against undeletable longterm cookies, a new generation of 'Super-Cookie', which silently conquered the internet. This new cookie generation offers unlimited user tracking to industry and market research. Concerning privacy Flash- and DOM Storage objects are most critical.
Flash-cookies (Local Shared Objects, LSO) are pieces of information placed on your computer by a Flash plugin. Those Super-Cookies are placed in central system folders and so protected from deletion. They are frequently used like standard browser cookies. Although their thread potential is much higher as of conventional cookies, only few users began to take notice of them. It is of frequent occurrence that -after a time- hundreds of those Flash-cookies reside in special folders. And they won't be deleted - never!
BetterPrivacy can stop them, e.g. by allowing to silently remove those objects on every browser exit. So this extension becomes sort of "install and forget add-on". Usually automatic deletion is safe (no negative impact on your browsing), especially if the deletion timer is activated. The timer can delay automatic deletion for new or modified Flash-cookies which might be in use. It also allows to delete those objects immediately if desired.

With BetterPrivacy it is possible to review, protect or delete new Flash-cookies individually. Users who wish to to manage all cookies manually can disable the automatic functions. BetterPrivacy also protects against 'DOM Storage' longterm tracking, a browser feature which has been granted by the major browser manufactures.

Yellowstone bear attack in Montana leaves 1 dead, 2 injured

email post

Yellowstone bear attack in Montana leaves 1 dead, 2 injured

Three separate bear attacks at the Soda Butte campgrounds near the Yellowstone National Park in Montana left one man dead, and a woman and another man injured.


Three separate bear attacks at the Soda Butte campgrounds near the Yellowstone National Park in Montana left one man dead, and a woman and another man injured.
The female victim suffered several lacerations, bites and crushed bones, while the male survivor had a bite on his calf. Both of them were taken to a hospital in Cody, Wyoming.
A spokesperson for the Montana Fish, Wildlife & Parks said that the officials are investigating the type of the bear that assaulted the campers, whether it was a grizzly bear or a black bear, and if there are more than one of those involved.
One camper that spent the night at the location said, “We heard a scream about 2. We weren’t sure what it was. We thought maybe teenagers yelling.”
Another camper said, “We heard a lady in the tent next door say ‘no.’ I said, ‘There’s a bear,’ and started hearing this snuffling. We heard her say, ‘a bear has attacked me.’”
The other people in the campsite ran to their vehicles and hid there until the animal went away.
Park officials have set five traps around the area and are doing aerial surveillance.

Under Creative Commons License: Attribution Non-Commercial No Derivatives

HOT! Japanese sexy girl with Bikni does Table Dance

email post
HOT! Japanese sexy girl with Bikni does Table Dance http://ping.fm/5JQ9s

Thursday, July 29, 2010

Canadians advised to cut sodium intake in half

email post


News Alert

Canadians advised to cut sodium intake in half
New guidelines saying Canadians should consume only half the sodium they now take in from salty foods and drinks could "save thousands of lives over the coming years," says Dr. Mary L'Abbé, the vice-chair of a federal working group releasing the targets Thursday.

Ford to lay off 400 at Windsor engine plant Ford Motor Co. will lay off nearly 400 workers at its Windsor, Ont., engine plant, CBC News has learned. The workers have been told they will be laid off beginning Nov. 1.

email post


News Alert
Ford to lay off 400 at Windsor engine plant
Ford Motor Co. will lay off nearly 400 workers at its Windsor, Ont., engine plant, CBC News has learned. The workers have been told they will be laid off beginning Nov. 1.

MocoSpace login

email post

using: One of the biggest mobile social networking website is owned by JNJ Mobile Inc. Sign up is must requires for share pictures, chat with people, listen music and play games.


Canadian National News feed

email post

Canadian Nation - Google News

↑ Grab this Headline Animator




Jerry BloggeR's Bios MOD: Asus Rampage Formula 1001 with SLIC

email post

Asus X38/X48 Rampage FormulaBios 1001 with SLIC 2.1

SLIC=ASUS
enjoy it:
Download





"bleach chapter 414" bone black mocospace mocospace login basil marceaux paul mccartney white house c 17

email post

"bleach chapter 414" bone black mocospace mocospace login basil marceaux paul mccartney white house c 17

MocoSpace login using: One of the biggest mobile social networking MocoSpace member login website is owned by JNJ Mobile Inc. Sign up is must requires for share pictures, chat with people, listen music and play games.

MocoSpace

MocoSpace is a social network specifically designed for use on a mobile device, also known as a mobile social network.[1]

MocoSpace Login

MocoSpace Login is a login spacefor social network specifically designed for use on a mobile device, also known as a mobile social network.[2]

one piece chapter 594, bleach 414, one piece 594, reborn 300, one piece 594 th

Bleach Chapter 414 Manga Bleach 414 · Read Naruto 504 – One Piece ...

Bleach Chapter 414 Manga Bleach 414. Read Bleach 414 spoiler, Bleach 414 English Spoiler, Bleach 414 Raw,Bleach 414 Confirmed Spoilers, Bleach 414 subbed Manga English Online. Naruto 504 Manga, Download Naruto 504 Manga Free. ...

LEACH CHAPTER 414 SUBBED ENGLISH HD

| Goofit

BLEACH CHAPTER 414 SUBBED ENGLISH HD. 1. Selling Inter striker Mario Balotelli to... 1. Change the Calendar working days and Sta... 1. Access any of the Commands in the Ribbon... 1. Change Time scale of the Calendar in MS . ...

Bleach 414 - Deicide 16 | Naruto 504 | One Piece 594 | Bleach 414
Jul 27, 2010
Bleach 414 – This is Bleach Chapter 414 manga scans that you can read online. Read Bleach Chapter 414 English translation. Bleach 414 is the latest chapter to come out on Bleach manga series. You can discuss the chapter but please to do ...


Jordan Grown V2 Dark Garnet/Black/Light Bone
We like how the Jordan brand has as of late been putting out a lot of new shoes that are aimed towards the more mature and aging sneakerheads. All of their Air Jordan sneakers are certainly nice, but they are not always appropriate for every occasion. That is why it is always nice to have other options for the times when you need your need your choice of footwear to be a little more grown up. For times like that there is the Jordan Grown V2 and this one will come in a dark garnet, black and light bone colorway.

The upper here will be made out of canvas and will be made out of deep garnet, which is a dark maroon sort of colorway. This will sit on top of a white sole a

Website

Mocospace is a relatively simple social networking website if compared to other popular social networking sites like Facebook or Myspace.nd will be accented by black in certain places throughout the shoe as well.

Marceaux for Governor : I'm not sure if you've seen the video of Basil Marceaux, the gentleman with the incredibly incoherent "vote for me for governor"

Paul Mccartney White House:Perhaps only Paul McCartney can call Performance at the White House a small concert club. In June, McCartney received the award.

A Boeing C-17 Globemaster III aircraft has crashed in Alaska at the Elmendorf Air Force base. The crash occured early on Wednesday evening (local time) at about.

Meaning of name: Enzo

email post



Enzio is a variation of Enzo
ORIGIN Italian
MEANING Diminutive of Vincenzo and Lorenzo
Entrancing, confident, and always up for a good time. This name is a great example of cool boys' names ending in "o."
VARIATIONS Miuccia 
ALTERNATIVES Enzio 
FAMOUS Enzos Footwear designer Enzo Angiolini; son of Patricia Arquette 

estorei.com

email post

7tweaker.net

email post

iestore.ca

email post

Meaning of name: Jacob

email post

ORIGIN: Hebrew
MEANING: Holder of the heel
Has come in and out of vogue for over 100 years. Landed at No. 1 for the first time in 1999, knocking Michael off the top after 38 years. In the Old Testament, Jacob was born holding his twin brother Esau's heel. Namesake Jacob Grimm, the German linguist and writer, was the author of "Grimm's Fairy Tales" with his brother Wilhelm. Jacobus is the Latin form of the name.
VARIATIONS:Jacoba  Jacobina 
ALTERNATIVES: Jacobe  Jakob 
NICKNAMES: Jake  Jay 
FAMOUS Jacobs Jacob Young (actor)  Jacob Marley ( "A Christmas Carol" fictional character)  Jacob Smith (actor) 

PrimoPDF 5.1.0.2 released

email post

Download Now (7.11MB)
Tested spyware free

PrimoPDF is the web's #1 free software for creating 100% industry-standard PDF files. Simple to use and free of annoying ads, converting files to PDF has never been easier!
Convert to PDF from any application by simply 'printing' to the PrimoPDF® printer - it couldn't be easier! Within minutes, you can create high-quality PDFs by converting from Word, Excel, PowerPoint, and virtually any other program you can print from.
  • FREE PDF Converter - not a trial version.
  • Print to PDF from virtually any application.
  • Create PDF output optmized for print, screen, ebook, or prepress.
  • No annoying pop-up ads, no registration requirement - no catch!
  • High-quality, easy to use PDF creator for all users.
  • Secure PDFs with 40-/128-bit encryption.
  • Add document information.

Firefox 4 Beta 2 now available for download

email post


Firefox 4 Beta 2 now available for download

The Mozilla community is proud to announce that Firefox 4 Beta 2 is now available for download on Mac, Windows or Linux.
Firefox 4 Beta 2 includes several major features and improvements – by testing them early we’ll be able to respond to your feedback for future versions of Firefox. The included Feedback Add-On that helps you let us know what you think about the new features and technologies in the beta.
You can read more about this release on the Mozilla Blog, or at any of the following links:
We want to thank the Mozilla community of nightly testers for the amazing feedback that helped shaped Firefox 4 Beta 2. We appreciate your assistance in testing this preview of the next version of Firefox!
«

Google Toolbar 7.1.2010.0723b (Firefox)

email post
DOWNLOAD

Keep the power of Google search close at hand. Google Toolbar puts a search box in your browser, making it easier than ever to find anything you want on the Web.
New and improved features:
  • Suggestions for navigation errors
  • AutoLink
  • Web History
  • Bookmarks
  • Send To
  • Translate
  • SpellCheck
  • PageRank Display
  • Highlight Search Terms
  • Open with Google Docs
  • Send with Gmail
  • Custom Layouts

Canadian National News feed

email post


B.C. sex tourist sentenced to 11 years

email post




News Alert
B.C. sex tourist sentenced to 11 years
Kenneth Klassen of Burnaby, B.C., convicted of child sex tourism and importing child pornography, has been sentenced to 11 years in prison.


Newsletter: Iranians and Toronto's Real Estate - Eco-warrior vs. Eco-developer - Land of Talk

email post
Quirks and Quarks

Your Podcasting Newsletter for the week of July 28th 
A Mohawk flag is held aloft in front of Queens Park in Toronto as demonstrators prepare for the Indigenous Day of Action march on June 24, 2010. Photo by Timothy Neesam/CBC.
RADIO SUMMER
Land of Talk performing live at Montreal's Segal Centre. Photo by Frank Opolko.
RADIO 2
Iranian demonstrators stand in front of Toronto's City Hall. Photo by Toronto City Life.
NEW REGIONAL PODCAST
ReVision Quest
The image of the Native warrior standing up to land developers is part of our national experience but who makes a stand when it's the Natives themselves logging the forest and mining the hills?
Canada Live
Land of Talk is joined by special guests from The Besnard Lakes for this hot concert recorded at the Segal Centre in Montreal.
CBC Toronto: Safe Haven
Safe Haven features stories about Iranians and Toronto's real estate market and examines how Iranians here continue to have an impact on the country they left behind.
Also on this week:
UPDATED MONDAYS RADIO SUMMER UPDATED SUNDAYS
The Sunday Edition
Download and hear a panel discussion with John Rafferty, Dr. Myra Rodriguez and Sarah Empy regarding the so-called crisis in Braille.
The Bottom Line
David Suzuki discovers the extent of global soil erosion and speaks with a supporter of genetically modified crops in Africa.
Tapestry
Mary Hynes speaks to Terry Eagleton about his most recent book, Reason, Faith and Revolution: Reflections on the God Debate.










Wednesday, July 28, 2010

John Bolz died

email post


John Bolz died in May when his car crashed into an electric pole. He was driving a 2005 Chevrolet when he crashed into a pole and died in the accident. The accident wasn’t harsh enough to actually kill someone but it seems that he was caught in a very bad and critical position during the impact. The incident was truly tragic and the whole nation got suddenly interested in the news.

There is a very strange thing about the way the accident happened. Usually in a situation where a car is found crashed into a pole or tree there is almost always the case of a drunk or disoriented driver who gets swirled out of control due to confrontation with other traffic. In this case there are skid marks on the road indicating the point of the drift. In John Bolz’s case however, there were absolutely no skid marks and according to the investigations the car simply strayed off the road and collided with the pole straight out. This is very weird because this usually happens when something happens to the driver before the accident, like losing consciousness.

It is thus presumed that John Bolz fell asleep while driving his car and collided with the pole. This presumption also supports the fact that the impact hit his critical organs with enough force to kill him, because he wasn’t able to brace himself due to the drowsiness. There are a lot of people at different forums where the news was first published and all paid their respects to John Bolz.

30 Habits that Will Change your Life

email post


Developing good habits is the basic of personal development and

growth. Everything we do is the result of a habit that was previously

taught to us. Unfortunately, not all the habits that we have are good,

that's why we are constantly trying to improve.

The following is a list of 30 practical habits that can make a huge

difference in your life.

You should treat this list as a reference, and implement just one

habit per month. This way you will have the time to fully absorb each

of them, while still seeing significant improvements each month.

Health habits

Exercise 30 minutes every day. Especially if you don't do much

movement while working, it's essential that you get some daily

exercise. 30 minutes every day are the minimum recommended for optimal

health.

Eat breakfast every day. Breakfast is the more important meal of the

day, yet so many people skip it. Personally, I like to eat a couple of

toasts in the morning along with a fruit beverage.

Sleep 8 hours. Sleep deprivation is never a good idea. You may think

that you are gaining time by sleeping less, when in reality you are

only gaining stress and tiredness. 8 hours are a good number of hours

for most people, along with an optional 20 minutes nap after lunch.

Avoid snacking between meals. Snacking between meals is the best way

to gain weight. If you are hungry, eat something concrete. Otherwise

don't. Update: for clarification, I mean don't eat junk food between

meals, but eating real food it's ok.

Eat five portions of fruits and vegetables every day. Our body and

brain loves getting vegetables and fruit, so I highly recommend eating

as much of them as possible. Five portions is the dose that's usually

recommended by many health associations.

Eat fish. Fish is rich of omega 3 and other healthy elements. At least

one meal per week of fish should be enough for getting all these

nutrients.

Drink one glass of water when you wake up. When you wake up, your body

is dehydrated and needs liquid. Make the habit of drinking one glass

of water after you wake up in the morning. Also, drink more during the

day.

Avoid soda. Soda is often one of the most unhealthy beverage you can

find. Limit your consumption of soda as much as possible and you're

body will be grateful for that.

Keep your body clean. I don't advise spending your day in front of the

mirror, but a minimum of personal care does never hurt.

If you smoke, stop it. There's no reason to smoke anymore, and quitting is easy.

If you drink, stop it. Same as above. Don't think that alcohol will

solve your problems. It never does. The only exception is one glass of

wine per day during meals.

Take the stairs. This is just a hack that forces you to do a minimum

of exercise. Instead of taking the elevator, take the stairs.

Productivity habits

Use an inbox system. Make the habit of keeping track of all the ideas

and things that comes to mind. You can use a notebook to do this, and

then sync everything on your computer.

Prioritize. If you have a list of things to do, where do you start?

One way is to prioritize your list. If you are in doubt, ask yourself:

"If I could only accomplish one thing today, what would it be?"

Plan, but not too much. Planning is important, and you should decide

in advance what you are going to do today or this week. However,

planning for more than a few weeks is usually inefficient, so I would

not worry too much about that.

Wake up early. Waking up early in the morning is a great way to gain

extra time. I personally like to wake up at 5 am, so that by 9 am I

have already accomplished what otherwise would have taken me many

days..

Check your email only twice per day. Email can easily become an

addiction, but it's usually unnecessary to check it every 10 minutes.

Make an effort and check your email only once or twice per day, see if

the world will still rotate as before after you try this.

Eliminate unimportant tasks. Being busy all day does not mean you are

doing important stuff. Eliminate every activity that's not important,

and focus on what really matters.

Clean off your desk and room. Having a clear room and desk is

important to maintain focus and creativity.

Automate. There are a lot of tasks that you need to perform every day

or every week. Try to automate them as much as possible.

Set strict deadlines. When you do something, decide in advance when

you're going to stop. There's a rule that states that you will fulfill

all the time you have available for completing a task, so make an

habit of setting strict deadlines for maximizing your productivity.

Take one day off per week. Instead of working every day, take one day

off per week (for example sunday) where you are not going to turn on

your computer. Use that time for doing recreational activities like

going for a walk.

Personal Development habits

Read 1 book per week. Reading is a good way to keep your brain active.

With just 30 minutes per day you should be able to read one book per

week, or more than 50 books per year.

Solve puzzles. Quizzes, word games, etc. are all good ways to exercise

your brain.

Think positively. You are what you think, all the time.

Make fast decisions. Instead of thinking for one hour wherever you are

going to do something, make your decisions as fast as possible

(usually less than 1 minute).

Wait before buying. Waiting 48 hours before buying anything is a

tremendous money saver, try it.

Meditate 30 minutes per day. A great way to gain clearness and peace

is through meditation. 30 minutes are not a lot, but enough to get you

started with meditation.

Career habits

Start a blog. Blogging is one of the best way to put your word out. It

doesn't have to be around a specific topic, even a personal blog will

do.

Build a portfolio. If your job is creating stuff, building a portfolio

is a great way to show what you are capable of. You can also

contribute stuff for free if that applies to your work.

What do you think? What are the habits that changed your life?

RCMP brass put pressure on PM to replace chief as rift deepens

email post
RCMP brass put pressure on PM to replace chief as rift deepens

Daniel Leblanc
Ottawa — From Wednesday's Globe and Mail
Prime Minister Stephen Harper is facing an unprecedented crisis in the RCMP and must choose between his hand-picked civilian leader and a group of high-ranking mutineers pushing for a new top Mountie, according to RCMP insiders and experts.
There is a growing rift in the national police force after at least seven senior officers formally complained to their bureaucratic bosses about the leadership style of Commissioner William Elliott. Sources said the conflict stems from Mr. Elliott’s abrasive and crusty personality and his frequent screaming matches with officers, often in relation to the rapid pace of reforms as the force comes under attack over its mishandling of high-profile cases.
But Mr. Elliott has his defenders within the RCMP, who describe his outbursts as examples of his passion for the force.
Sources said Assistant Commissioner Mike McDonell, who commands the Ontario division and is nearing retirement, sent a letter to Public Safety Minister Vic Toews and other government officials last week laying out a series of complaints about Mr. Elliott’s alleged dictatorial conduct. Other assistant and deputy commissioners vented their anger with the deputy minister at Public Safety Canada, and now the government has hired an outside adviser to determine the extent of the crisis.
A recently retired member of the brass, former senior deputy commissioner Bill Sweeney, said on Tuesday that tensions have steadily grown since Mr. Elliott became the RCMP’s first civilian leader three years ago.
“There was considerable discontent with the manner that the commissioner conducted himself, both around senior and junior officers. The tension was palpable, and I’m not surprised that people felt compelled to step forward,” said Mr. Sweeney, who left the RCMP on July 1 after nearly 36 years of service. “The commissioner is a man of extremes. In some instances, his conduct was unacceptable to others around him.”
The Clerk of the Privy Council responded to the crisis by launching a “workplace assessment,” hiring an independent adviser to determine the cause of the tensions and see whether there is a potential reconciliation among senior managers.
Mr. Harper’s office sent a clear message to the RCMP brass on Tuesday to calm down, saying the current exercise has “to occur expeditiously and without further rancour.”
Mr. Toews added: “Frankly, it is unacceptable for individuals in leadership positions in an organization as important as the RCMP to air internal disputes through the news media.”
Senior officials who support Mr. Elliott feel the conflict could be related to personal ambitions and rivalries between members trying to move up within the RCMP.
“The commissioner is a passionate guy,” said a member of the senior executive committee. “He expects the best out of everyone.”
Sources described the complainants as “Ottawa-centric,” saying Mr. Elliott does not face the same problems with senior leadership in the rest of the country.
But Mr. Sweeney defended his former colleagues, saying he believes their motivations are honourable.
“Many felt that the behaviours that [Mr. Elliott] was exhibiting were inconsistent with what we are asking our front-lines officers to do when dealing with the public. That contradiction was just becoming intolerable to some,” he said.
A number of RCMP watchers are questioning the government’s “workplace assessment,” arguing the rift between Mr. Elliott and his senior officials can no longer be bridged after more than a year of friction.
“This is too little, too late,” said Linda Duxbury, an expert on the RCMP at Carleton University’s Sprott School of Business.
Ms. Duxbury said the police culture is “based on trust,” and if the government insists on keeping Mr. Elliott in his position, it will have to ask, “How many of his leadership team need to be replaced?”
Liberal Senator Colin Kenny, who has studied the RCMP extensively, said the Harper government needs to act decisively and appoint a new commissioner, all the while creating a board of directors to oversee the RCMP.
Mr. Elliott did not agree to an interview on Tuesday. Reached at his home after a CBC report on the matter the previous night, he blamed the conflict on “tremendous changes” within the force. A number of senior RCMP officers are nearing retirement and are being replaced, and there is tension within the force over the need to centralize or decentralize operations.

The meaning of name: John

email post
The meaning of name: John


The boy's name John \
jo-
hn\ is pronounced jahn. It is of Hebrew origin, and the meaning of John is "God's grace". Biblical: the name of the longest-lived of the 12 apostles, who was especially loved by Christ. Also the name of John the Baptist, who baptized Christ in the Jordan river. Dozens of variant forms, given names and surnames, male and female, have been created in almost every language. For a few examples, Jan is a Dutch and Slavic form; Janos is Czech; Joao is Portuguese; and the Johan variants are German and Swiss. Possibly the most popular name in history; kings, popes, saints, heroes, villains, and men of every degree between have borne the name. A contemporary trend seems to be to hyphenate Joh, Jean, Jon, Sean, and Shawn with various other names. Actors John Gielgud, John Barrymore, John Wayne, John Cusack, John Leguizamo, Johnny Depp; American Presidents John F. Kennedy, John Tyler, John Adams, John Quincy Adams; poet John Donne; Beatle John Lennon; composer Johannes Bach; football player John Elway; lawyer Johnnie Cochrane.

open office hack

email post


My first hack

So - we've built and run OO.o, and we want to prove to ourselves that it is in fact possible to hack on it. So in a new terminal do this:
cd build/src680-m66
. ./LinuxX86Env.Set.sh
cd vcl
Now have a hack at vcl/source/window/menu.cxx (Menu::SetItemText); (near line 1770) I suggest manually applying this change:
-               pData->aText = rStr;
+               pData->aText = String(rStr).Reverse();
Then save. ( You can find more sensible things to hack in the Tutorials )
You're still in vcl/ yes ? then type 'build debug=true'; wait for the scrolling text to stop; (5 seconds?). Now re-run soffice -writer. You should notice the effect in the menus. If not, ensure the previous soffice.bin was dead with killall -9 soffice.bin
Note: for day to day hacking you want to just run 'build' inside the source tree. It is also highly recommended to work inside a copy of the build tree, and generate / test patches in an un-hacked version. To copy just the build/src680-m66 directory elsewhere, you need to use the relocate tool.
There is also documentation here on it.
deliver, deliver.log and prj/d.lst The syntax of d.lst is more comprehensible than build.lst, it omits some default actions, such as copying build.lst into
inc/<module>/build.lst. A line is of the form:
       [action]: [arguments]
       mkdir:    %_DEST%\inc%_EXT%\external
where if '[action]:' is omitted, it defaults to the 'copy' action. Typical actions are copy, mkdir, touch, hedabu, dos and linklib.
The 'hedabu' action is particularly interesting, inasmuch that it cosmetically re-formats the header to shrink it on install and adds the module name to the include path (#include "my_header.hxx" becomes #include <my_module/my_header.hxx>). Otherwise it's much like the copy action.
     During the action, various macro variables are expanded some of which are:
  •  %__SRC% — distribution directory name eg. unxlngi4.pro</li>
  •  %_DEST% — absolute path into solver eg. /opt/OpenOffice/OOO_STABLE_1/solver/641/unxlngi4.pro
  •  %_EXT% — (unusual) way of having minor updates eg. 641.1, typically used to version every base sub-directory.
Typically then, if indeed you need to add a rule (cf. implicit directory copies), it will be of the form:
       ..\%__SRC%\inc\sal\*.h %_DEST%\inc%_EXT%\sal\*.h
NB. relative paths are relative to the 'prj/' directory.
Sometimes you might run into the situation where you'd like to remove the delivered files from solver. Your configuration might have changed and they are no longer needed. "deliver -delete" does just that, however you might still need to delete "deliver.log" files manually as well.

Can I get a char *, please?

Just barely. OO.o has at least six string wrappers, although the C implementations are of little interest:
  • rtl_String — sal/inc/rtl/string.h
    "Normal" string plus reference counting. rtlstring->buffer is useful, as is rtlstring->length. This object encapsulates an generic 8bit string - of unknown encoding. Feel free to treat rtlstring->buffer as your beloved char *. If you really want to look at the implementation of some rtl_String function and lxr nor grep can help you, have a look at sal/rtl/source/strtmpl.c.
  • OString — sal/inc/rtl/string.hxx
    Simply a rtl_String wrapped inside a class; you can use ostring.pData to get at the rtl_String (it's public). OString has reasonably useful methods for if you need them.
  • rtl_uString — sal/inc/rtl/ustring.h
    "Normal" Unicode string, similar to rtl_String, and refcounted as well. However, this one always comes in UCS-2 encoding, presumably to be compatible with Java's questionable choices. See rtl_String above to find where the implementation of some rtl_uStringfunctions is hidden.
  • OUString — sal/inc/rtl/ustring.hxx
    An rtl_uString wrapped inside a class. This is what most of the OO.o code uses to pass strings around. To convert an OString to an OUString it is necessary to specify the character set of the OString see; sal/inc/rtl/textenc.h — the only interesting case is RTL_TEXTENCODING_UTF8
  • String — tools/inc/string.hxx
    This is an obsolete string class, aliased to 'UniString'. It has a number of limitations such as a 64k length limit. You can have the buffer with GetBuffer(), but it's Utf-16 encoded.
A couple of conversion functions are really useful here, particularly:
rtl::OString aOString = ::rtl::OUStringToOString (aOUString, RTL_TEXTENCODING_UTF8);
And the reverse:
rtl::OUString aOUString = ::rtl::OStringToOUString (aOString, RTL_TEXTENCODING_UTF8);
If you just want to programattically print out a string for debugging purposes you probably want define a macro like :
#define CHAR_POINTER(THE_OUSTRING) ::rtl::OUStringToOString (THE_OUSTRING, RTL_TEXTENCODING_UTF8).pData->buffer
and use it like :
printf ( "SvXMLNamespaceMap::AddIfKnown : %s / %s\n", CHAR_POINTER(rPrefix), CHAR_POINTER(rName) );.
For the obsolete String class, aliased UniString, it's like :
printf ( "rGrfName : %s\n", ByteString( rGrfName, RTL_TEXTENCODING_UTF8).GetBuffer() );
To print the value of rtl::OUString directly in the debugger, you can use dbg_dump(). It is intended to be called interactively from the debugger, in both debug and non-debug builds of OOo. You can see the definition in sal/rtl/source/debugprint.cxx.
Some code snippets about manipulating those objects can be found on the codesnippets service page : [1]

Linkoo & Limitations

Linkoo is the tool that implements the -l functionality of bin/ooinstall. It essentially sym-links files of similar names into your local tree, allowing a fast development iteration.
It is however slightly limited - some of the modules cannot be linked for various reasons; these are: cppuhelper and configmgr, thus in the rare case that these are altered, they must be copied manually into /opt/OOInstall/program.
In addition symlinks cannot be used for soffice.bin, and this is more commonly altered - it has to be installed from desktop/unxlngi4.pro/bin/soffice NB. with an appended '.bin'

Read the Fine manual

With the power of C++ comes the ability to shoot yourself in the foot all the more easily; (and implicitly), cf. Holub, Rules for C and C++ programming, McGraw-Hill, 95.
The best way to prepare yourself for battle is to read the OpenOffice coding guidelines, and for the easily confused c'tor / d'tor is short for constructor / destructor.
Also, there's an extensive list of recommended literature about C++ - but that's of course no prerequisite to start coding.

Sending patches

The toplevel structure of the OO.o source code is not the same as the layout of the CVS repository [ a good rational for this strange state of affairs is absent ]. Thus to work out what real module a file is in you need to do eg.
       cd binfilter
       cat CVS/Repository
       framework/binfilter
This shows you that the 'binfilter' directory is part of the 'framework' project.
These days there is a hackers bug filing page that will assign bugs to the correct project, and the correct owner to get rapid attention.

Starting the right app

As you start soffice.bin, there are several useful parameters to use to accelerate your debugging experience; particularly -writer, -calc, -draw, and (the wizardly painful) -impress arguments.

Understanding D' make (man)

While the build system is in similar to many other systems, it is also perhaps slightly different. The overview is that each module is built, and then the results are delivered into the solver. Each module builds against the headers in the solver. Thus there are a few intricacies.
  • build — this perl script solenv/bin/build.pl is used in conjunction with prj/build.lst to ensure that every module that is needed is built first.
    build then un-winds internal module dependencies, and builds each module with a chdir, dmake pair.
  • deliver — this perl script solenv/bin/deliver.pl installs headers, and libraries (etc.) into the solver, as informed by prj/d.lst. Crucially deliver ensures that the date stamp on any file that is installed to the solver is the same as that in the module's directory. This ensures, that (particularly for headers) that there is no dependency cascade triggering re-builds in other modules.

Standard directories

There are various standard directories and files in most of the modules that make up OO.o, here are some of the more useful:
  • prj
    • build.lst — this lists directories to be made, '^#' comments are allowed, the order of the list is immaterial see detail, it is dictates build's operation.
    • d.lst — this file describes the deliver process, see detail.
  • util — typically the util directory is charged with glueing together the sub-libraries for each sub-module into a single large library, adding system library dependencies, building GUI resource files etc. All the work is described in makefile.mk, this is usually the last directory to be built in a project.
  • inc — public headers are typically separated into an 'inc' directory, these will be installed into the solver by the 'deliver' phase (using prj/d.lst)
Build's mode of operation is to invoke 'dmake' in each of the projects' directories with a given dependency order. dmake then executes the rules in makefile.mk.

prj/build.lst

On first view build.lst looks scary:
vc      vcl : NAS:nas FREETYPE:freetype psprint rsc sot ucbhelper unotools sysui NULL
vc      vcl                      usr1   -       all     vc_mkout NULL
vc      vcl\source\unotypes      nmake  -       all     vc_unot NULL
vc      vcl\source\glyphs        nmake  -       all     vc_glyphs vc_unot NULL
...
vc vcl\mac\source\src  nmake - m vc__srcm vc_unot NULL
vc vcl\util   nmake - all 
vc_util vc__plug.u vc__appa.u vc__appm.m vc__appu.u vc__appw.w vc__gdim.m 
vc__gdiu.u vc__gdiw.w vc__srcm.m vc__srcu.u vc__srcw.w 
vc__wina.u vc__winm.m vc__winu.u vc__winw.w vc__du.u 
vc__gtka.u vc__gtkw.u vc__gtkg.u vc__kde.u vc_app 
vc_ctrl vc_gdi vc_hlp vc_src vc_win vc_glyphs NULL
      
so we need to try and un-pack what's going on here, which is in fact not as odd as it might seem at first glance. Firstly lists are terminated by the 'NULL' string. Every line is prefixed by a shortcut which has to be unique, no two modules are allowed to have the same shortcut.
  • First active line contains a ':', this describes the fact that this project (vcl) depends on these other modules 'nas', 'freetype', 'psprint' etc. to be built first. This is for inter-project dependencies.
  • Some modules have a CAPITALS:lowercase arrangement; the first segment is a conditional, driven by a space delimited list in the BUILD_TYPE environment variable at build time.
  • Then we have a redundant line 'usr1' [ for fun ? ], in fact only lines containing the magic string 'nmake' are valid after this.
  • The next lines describe internal project directory dependencies and look like:
    [shortcut] [path to dir to build] nmake - [flags] [unique-name] [deps...] NULL
    vc           vcl\source\glyphs    nmake -   all     vc_glyphs   vc_unot   NULL
          
    shortcut is not used; flags determines which platforms this builds on; usually single char platform codes: 'dnpum' 'u' being Unix. The higher up the system, the more stuff is flagged 'all'.
    unique-name this is a magic name, used by other lines to describe an internal dependency. deps... any number of names of other directories in this file, that must be built before this one. If such prerequisite dir is built for special platforms only, the platform code has to be appended to its magic name.
So we see in the vcl case that vcl\source\unotypes (vc_unot) has to be built before vcl\source\glyphs (vc_glyphs). For Mac vcl\mac\source\src (vc__srcm) has to be built before vcl\util (vc_util) It is important to understand that the order of the list is ~immaterial, and instead of a simple ordered list, we have a more complex internal dependency system — this contrasts with most other make systems.

[2010/07/24] CrystalDiskInfo 3.7.0 Beta2

email post


[2010/07/24] CrystalDiskInfo 3.7.0 Beta2

Improved SandForce's controller support!!

Tuesday, July 27, 2010

My_7PE.cmd has been updated

email post


update notes:
1. Add option to integrate acronis true image 11 for distribution:
- Seagate DiscWizard
- Maxtor MaxBlast 5
- Acronis WD Edition
- Acronis True Image Home 11

2. Add option to integrate UltraIso with 2 Virtual Drive

notes: UltraIso Virtual Drive can be use to install Windows NT6 family (Vista/Server 2008/Seven) from iso file.
3. Add zip file support
4. Add option to create iso file

screenshot:

Build Windows 7 PE (X86 only) without WAIK

email post


Every Windows 7 has equipped with Windows PE (Winre) as a recovery tools that can be access from install DVD, recovery folder or system repair cd.
All those Winre image are the same image except start with different shell.

Windows 7 also has Dism to mount/unmount wim image, all of that resources (winre and dism) can be use to build custom Windows 7 PE without downloading WAIK.

I made a batch command to build custom Windows 7 PE using winre image, mount wim image using dism, add additional file/registry, save wim image and create bootable ufd using diskpart to be used with Windows 7 PE.
it has additional tasks also to make back up entry of installed Windows 7 so you can use UFD to boot current windows 7.
more details about build process can be read in readme.txt
limitations:
-My_7PE can only be run on windows 7 or windows 7 PE
-My_7PE support WIndows 7 32 bit only
My_7PE tested on Windows 7 en-US only, but it supposed to automatically detect distribution language and international settings, please let me know if does not work for others distribution languages.

Due to similarity of build processes with Wimb's Make_PE3, i use packages/file list and registry from Make_PE3. thanks to Wimb for his great effort thumbup.gif
credits goes to Wimb and others original author thumbup.gif

here some screenshots My_7PE running some portable apps
(notes: portables apps are not included, you can add portable apps to ufd and manage using pstart)


My_7PE has been updated, see post #34
Download My_7PE from here :
http://www.mediafire.com/?wwokx3adrnw

Official Windows 7 Repository

email post

Official Windows 7 Repository



Part 1 of 4: Download Windows 7

The fastest way to download Windows 7 is using BitTorrent, which is a P2P protocol for file sharing. Not only BitTorrent provides high speed of download for popular files, but it also gives you the opportunity to improve other people's download speed.



To download files using BitTorrent you need an application that supports the BitTorrent protocol (called a "BitTorrent client"). The best BitTorrent client is BitComet. But also feel free to use any other BitTorrent client.



Once you have a BitTorrent client, download the tiny ".torrent" file bellow that belong to the version that you want (32 bits or 64 bits). This file will be directly opened with your BitTorrent client and the download will start instantly. The magnet link is another method to start downloading a file with your BitTorrent client.

Those 2 ISOs above allow you to have Windows in any language that you want (35 languages available).
› Take a look at part 5-F bellow to select your language.

These ISOs also allow you to install any edition that you want (Ultimate, Professional, Home Premium, Home Basic, Starter).
› Take a look at part 5-G bellow to quickly unlock other editions.

Note: By default it will install the Ultimate edition.
Note: Multi-language is available only if you install the Ultimate edition.




Part 2 of 4: Check the authenticity

It is absolutely crucial that you check the authenticity of the ISO you just downloaded. You must check that it hasn't been modified by anyone, that it's clean from spywares and viruses, and that it is free from corruption or any transfer error.

To confirm the authenticity of the ISO you downloaded, all you have to do is to make sure that it is exactly (bit for bit) the same as the one Microsoft provides. We can know that two files are identical by matching their hashes. The hash of a file is the result of its calculation. Each file has a unique hash, if the file is modified (even only by 1 bit) then its hash will be completely different.

Microsoft provides through his website (http://blogs.technet.com/[...] and http://technet.microsoft.com/[...]) the official hashes for all the Windows 7 ISOs. Please check the hash of the ISO that you have downloaded using HashCheck ( direct download — instructions) or any other hash calculator, and verify that it is the same as the ones provided by Microsoft:
  • Microsoft Windows 7 32 Bits

    • MD5: D0B8B407E8A3D4B75EE9C10147266B89
    • SHA-1: 5395DC4B38F7BDB1E005FF414DEEDFDB16DBF610
  • Microsoft Windows 7 64 Bits

    • MD5: F43D22E4FB07BF617D573ACD8785C028
    • SHA-1: 326327CC2FF9F05379F5058C41BE6BC5E004BAA7



Part 3 of 4: Install Windows 7

You have 2 options to install Windows 7. You can simply burn the ISO to a DVD (Scroogle: How to burn an ISO to a DVD), or you caninstall Windows 7 from a USB flash drive instead of a DVD.

Insert the Windows 7 installation disk into your drive and restart your computer. Press any key when asked to launch the installation (Scroogle: How to boot from a DVD). You might need to change the boot priority in your BIOS in order to boot from your DVD drive or from your USB flash drive (Scroogle: Change boot priority order).

During the installation, you do not need to enter any product key, just bypass the step when it asks for one. You might also untick the "activate online" checkbox.



Part 4 of 4: Activate Windows 7

The safest method to activate Windows 7 is using a software called a "loader". It is safe because whatever happen this is only software so even if it doesn't work you will be able to uninstall it and continue to use your computer.

It is also the most reliable software method available today. This method has been working for Windows Vista for more than 3 years (and counting) and has proven its reliability and efficiency. This is a mature technology to activate Windows, it works with Windows 7 32 and 64 bits on any computer (homemade or branded) and even on Macintosh. Nothing special is required before using a loader.

You're invited to download and install the Windows 7 Loader created by Daz, which is currently the most popular loader. However if you want to try another one, there are other loaders (including open-source ones).

how to add keywords to blogger?

email post

Click on the 'Edit html' tab
click on the 'edit html' tab



Here is the code you have to add

<meta content='DESCRIPTION HERE' name='description'/>
<meta content='KEYWORDS HERE' name='keywords'/>
<meta content='AUTHOR NAME HERE' name='author'/>



DESCRIPTION HERE:Write your blog description
KEYWORDS:Write the keywords of your blog
AUTHOR NAME:Write the author's name(Your name)


{ UPDATE : }
Now..You don't need to do it manually.. I created an automatic Meta Tags Generator to make this process easy for you!
Just go to this page and Enter some basic information like keywords,description,etc.. It will automatically generate you error free, effective Meta tags. Once done, copy that code and follow the next step.

3.Add the above code just after this [Look at the below screenshot]
<b:include data='blog' name='all-head-content'/>