Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Wednesday, May 11, 2011

How to install SSD

email post
Reactions: 

Instruction of intstalling SSD

There is one very important thing to do before you install your SSD. Read the User manual! SSD is different from normal Hard drive. Please read the user's manual before you do anything!

Monday, April 25, 2011

Computer blue screen code 0X0000004E (0X0000009, 0X00000261, 0X000000001, 0x00000000)

email post
Reactions: 

Computer blue screen code 0X0000004E (0X0000009, 0X00000261, 0X000000001, 0x00000000)


When the computer starts the boot process the following blue screen appears in the code: stop 0x0000004E, so the computer can not boot, you can try Safe Mode can not enter the system.

Computer blue screen reasons

:
◆ Error analysis: When the computer is there stop 0x0000004E, generally the system during startup blue screen (we call boot blue screen). If the Startup and Recovery system is set to reboot automatically, we generally do not see the stop 0x0000004E. The system will automatically restart. This blue screen problems occurred. Generally because of hardware failures, such as memory quality, and used for some time, there will be blue this started. In addition, if a newly added memory, it should attract attention, or was new memory quality problems, or else the original memory is not compatible.

Computer Blue Screen Solution

:
◇ Solution: If you recently added a memory, make sure your memory brand is the same, if not the same, there may be a conflict of memory and motherboard, and if not, you then open the chassis, the chassis and then card inserted all the data lines and a solid point to see if the same, you remove the memory and look at the surface and the finger part of the memory is dust and dirt, if you can brush the surface of dust about memory, and then memory eraser clean up with finger, if still the same, if your motherboard has two memory, you pull one, and then boot look. If still the same, you then put on another, it replaced a boot to see if the computer is still there stop 0x0000004E, there may be damage to your memory.
Virus causes: there is a fault caused by a virus start blue screen stop 0x0000004E, if you suspect a virus, you can try go in safe mode to safe mode, anti-virus to see if the computer did not detect toxic drug does not mean, you know generation of antivirus software is built on the basis of the virus, so in this case you only reinstall system.
If you're still there stop 0x0000004E,. Other hardware failure may be caused by a blue screen.

Tuesday, March 29, 2011

Joomla vs. Drupal: An open source CMS shootout

email post
Reactions: 

Drupal vs. Joomla

:An open source CMS shootout

Choosing a Web content management system often comes down to one question: Joomla or Drupal?


For many organizations (or individuals) with content to post and manage, blog tools like the highly popular WordPress may be more than adequate. But for companies with greater amounts of content, users, or complexity, including integration with ecommerce and also with other internal and external applications, a more comprehensive content management systems (CMS) is needed.
Here's a look at two popular open source content management systems: Drupal and Joomla! (the exclamation point is part of the official name, tsk tsk, but for punctuative simplicity I'm omitting it for the rest of this article). I've asked developers to weigh in on the strengths, weaknesses and unique features each offers, to help determine which is the best match for your organization's content needs.

Before we begin, it should be noted that both Joomla and Drupal keep getting updated -- e.g., Joomla 1.6 was released January 10, 2011, and Drupal 7 on January 5, 2011 -- and get more add-on modules. This is a good thing, obviously. But it also means that the opinions expressed in this article may become outdated or invalidated.

Saturday, March 05, 2011

How To: Repair And Restore Windows 7 Master Boot Record (MBR)

email post
Reactions: 

How To: Repair And Restore Windows 7 Master Boot Record (MBR)

The Master Boot Record (MBR) will be created when you create the first partition on the hard disk. It is very important data structure on the hard disk drive. The Master Boot Record contains the Partition Table for the hard disk and a small amount of executable code for the Windows Vista boot start. The location of Master Boot Record files is always the first sector on the hard disk.When you start your Windows Vista computer, the BIOS (basic input/output system) looks for the MBR on the first sector of your hard drive. The MBR tells the BIOS which partition on the hard drive contains the operating system.

When we try to boot after hardware testing procedures, we see just blank screen without any messages. It means the piece of code at the beginning of the MBR could not be executed properly. That’s why even error messages could not be displayed.Also when we try to boot into Windows Vista, we see an error message like “Operating System not found” and this error occurs with a broken Master Boot Record (MBR).

To Restore corrupted Windows Vista Master Boot Record(MBR),follow the simple procedures.

You can use the Bootrec.exetool in the Windows Recovery Environment (Windows RE) to troubleshoot and repair the following items in Windows Vista:

A master boot record (MBR)
A boot sector
A Boot Configuration Data (BCD) store

Note When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the issue, or if you must troubleshoot more steps manually, use the Bootrec.exe tool.

To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

Put your Windows Vista installation disc in the disc drive, and then start the computer.
Press a key when you are prompted.
Select a language, a time, a currency, a keyboard or an input method, and then click Next.
Click Repair your computer.
Click the operating system that you want to repair, and then click Next.
In the System Recovery Options dialog box, click Command Prompt.
Type “Bootrec.exe”, (without the quotes) and then press ENTER.

Note: To start the computer from your Windows Vista installation DVD, your computer must be configured from BIOS to start from the DVD drive

Bootrec.exe options

The Bootrec.exe tool supports the following options. Use the option that is appropriate for your situation.

/FixMbr

The /FixMbr option writes a Windows Vista-compatible MBR to the system partition. This option does not overwrite the existing partition table. Use this option when you must resolve MBR corruption issues, or when you have to remove non-standard code from the MBR.

/FixBoot

The /FixBoot option writes a new boot sector to the system partition by using a boot sector that is compatible with Windows Vista. Use this option if one of the following conditions is true.

The boot sector has been replaced with a non-standard Windows Vista boot sector.
The boot sector is damaged.
An earlier Windows operating system has been installed after Windows Vista was installed. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

/ScanOs

The /ScanOs option scans all disks for installations that are compatible with Windows Vista. Additionally, this option displays the entries that are currently not in the BCD store. Use this option when there are Windows Vista installations that the Boot Manager menu does not list.

/RebuildBcd

The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista. Additionally, this option lets you select the installations that you want to add to the BCD store. Use this option when you must completely rebuild the BCD.

Note: If rebuilding the BCD does not resolve the startup issue, you can export and delete the BCD, and then run this option again. By doing this, you make sure that the BCD is completely rebuilt. To do this, type the following commands at the Windows RE command prompt:

bcdedit /export C:\BCD_Backup
c:
cd boot
attrib bcd -s -h -r
ren c:\boot\bcd bcd.old
bootrec /RebuildBcd

Note: If you are running a RAID array, if this does not help and you are recieving errors. Check in your BIOS and make sure the BIOS did not convert back to IDE.Windows Vista needs to see the compleate MBR, In a RAID setup the MBR is split between two drives.

Thursday, February 17, 2011

Introduction to jQuery

email post
Reactions: 
[Introduction]

jQuery is a JavaScript, Library, therefore, the basis you have a bit of JavaScript, at least wrote some JavaScript is rather easy to use, and can read the follow-up teaching. jQuery's core programs is not packet hills the sea, anything can help you do the contrary, jQuery DOM document is mainly used in the operation, including the "Quick select elements (Element)" and "do something" quickly select the elements can once you select a single or multiple elements, then you can use these elements to be selected to make some changes, such as hide, show, and so on. In addition jQuery core program also strengthened the non-synchronous transfer (AJAX) and event (Event) of the features that make it easier to operate remote files and events.

For more see that jQuery is JavaScript to enhance the inherent deficiencies, you still need to write some code to accomplish the various functions you need, the difference is, the correct use of the jQuery can make your code more concise, more elegant The express, which can be seen in subsequent examples, more importantly, should also make you more rapid development of the function you want.

Perhaps you might want to say, in this era of Web 2.0, I need some more beautiful, brilliant Widgets to decorate my site, like Yahoo UI or functionality as those provided by ExtJS, jQuery there? In fact, the design of jQuery has taken into account issues such expansion, the current jQuery's plugin has hundreds, and you do not have to completely write their own hands, look around on the jQuery website, perhaps you need the function of others has been to help you get out. In terms of UI, jQuery UI associated with the plugins have already done some integration, the current independent published as jQuery UI (http://ui.jquery.com/), if you have not heard before the jQuery UI, I suggest you go website shows an example of speaking about, ah, although there may be some bug exists, but overall the standard has been a considerable, and perhaps you will be more interested in jQuery.

The following teaching content, is to acquire the jQuery John Resig's a presentation of "Building Interactive
Prototypes with jQuery "to adjust the content and comments, hoping to compare the true way to render the design implications of jQuery.


[Of]

jQuery how to "quick select elements" and "do something" mean? Please take a look at the code:

    
$ ("Div"). AddClass ("special");

$ Token money is the jQuery object, use $ ("div") is to use jQuery to select elements, you can select the file in this example all the <div> elements. Followed by the. AddClass ("special") is used to do something, this example is that all previously selected elements to add a file called "special" in the class. That is, through the $ ("div"). AddClass ("special") syntax, allowing you time to help document some <div> adding special elements of the class.

Please note that Oh, just the examples have been selected for a number of elements to do a batch operation, that is, if the document has three <div>, it will be time to find the three <div> and all subsequent action apply . That you had to use JavaScript to write in their own very different, had to write their own may need to use a loop like the syntax, and jQuery has a function of most of the batch processing function, this alone can make a more concise your program.

$ Tokens will be on the money you use jQuery in the process of learning and the most important objects (or you want $ as a function can, indeed, do), use just as you can see, by looking for elements are used, the parameters can bring. Perhaps you are not used to the money as a function name can be tokens, you can also use the name of jQuery, the money is seen as tokens jQuery an abbreviation, make you look more simple and some of the function, if you want to set yourself another acronym For example, $ j, is possible, this part of the follow-up to explain, take a look at the example has been under the result will be, and the above example is exactly the same:

    
jQuery ("div"). addClass ("special");


[Select elements]

Use the previous example $ ("div") to select elements, the parameters into the div element is that you are looking for, this is CSS selectors (CSS Selector) syntax, like CSS layout and appearance are making use of selector syntax. jQuery's CSS Selector supported include CSS 1, CSS2, and has not yet been released CSS3, also supported through the plugin can be used in XPath syntax, use the CSS, XPath syntax can easily find your page elements to be addressed , take a look at more examples below.

This is a raw HTML:

    
<div id="body">
      
<h2> Some Header </ h2>
      
<div class="contents">
        
<p> ...</ p>
        
<p> ...</ p>
      
</ Div>
    
</ Div>

Below with a series of examples, in blue and show some of the basic syntax to display the file in the dark word will be selected element.

$ ("Div")
<div id="body">
  
<h2> Some Header </ h2>
  
<div class="contents">
    
<p> ...</ p>
    
<p> ...</ p>
  
</ Div>
</ Div>
Explanation: Select all <div>


$ ("# Body")
<div id="body">
  
<h2> Some Header </ h2>
  
<div class="contents">
    
<p> ...</ p>
    
<p> ...</ p>
  
</ Div>
</ Div>
Explanation: Select the element id for the body


$ ("Div # body")
<div id="body">
  
<h2> Some Header </ h2>
  
<div class="contents">
    
<p> ...</ p>
    
<p> ...</ p>
  
</ Div>
</ Div>
Explanation: Select the id for the body of <div>


$ ("Div.contents p")
<div id="body">
  
<h2> Some Header </ h2>
  
<div class="contents">
    
<p> ...</ p>
    
<p> ...</ p>
  
</ Div>
</ Div>
Explanation: Select the class for the contents of which encase <div> <p> all the underlying


$ ("Div> div")
<div id="body">
  
<h2> Some Header </ h2>
  
<div class="contents">
    
<p> ...</ p>
    
<p> ...</ p>
  
</ Div>
</ Div>
Explanation: Select the next layer is enclosed in <div> <div>


$ ("Div: has (div)")
<div id="body">
  
<h2> Some Header </ h2>
  
<div class="contents">
    
<p> ...</ p>
    
<p> ...</ p>
  
</ Div>
</ Div>
Explanation: and the former an example of the contrary, here is to select at least one wrap of <div> <div>


[Do something]

Teaching in the previous paragraph describes how to use jQuery to select elements, which are most of the syntax allows you to quickly select multiple elements of the first, of course, is to come next for these elements to make some changes to the selection Hello. Built-in functions through jQuery, you can:


    
Operate on the DOM, such as new or modified file node
    
Add an event handler
    
To do some basic visual effects, such as hide, show, drop-down display, fade, etc.
    
Use AJAX to send the form to get remote file content or



[Example 1] to select the all target attributes <a>, and include a paragraph in the node text.

    
$ ("A [target]"). Append ("(Opens in New Window)");

This is a raw HTML:

    
<a href="http://jsgears.com"> jsGears </ a>
    
<a href="http://google.com" target="_blank"> Google </ a>
    
<a href="http://amazon.com" target="_blank"> Amazon </ a>

Select a target attribute and the results after adding the text:

    
<a href="http://jsgears.com"> jsGears </ a>
    
<a href="http://google.com" target="_blank"> Google (Opens in New Window) </ a>
    
<a href="http://amazon.com" target="_blank"> Amazon (Opens in New Window) </ a>

[Example 2] to select the element id for the body, and modify the two css properties.

    
$ ("# Body"). Css ({
      
border: "1px solid green",
      
height: "40px"
    
});

This is a raw HTML:

    
<div id="body">
      
...
    
</ Div>

Select the element id for the body and modify the css the results of the (indicative):

    
<div id="body" style="border: 1px solid green; height: 40px">
      
...
    
</ Div>

[Example 3] on the page when the form submission to include a judge, if the username value of this field is empty, then to display help text within the block.

    
$ ("Form"). Submit (function () {
      
if ($ ("input # username"). val () == "")
        
$ ("Span.help"). Show ();
    
});

May be acting similar to the following HTML, the start span.help is hidden, if not enter the username, will show:

    
<style type="text/css">
      
. Help {display: none}
    
</ Style>
    
<form>
      
<label for="username"> Please enter a name </ label>
      
<input type="text" id="username" name="username" />
      
This field is required <span class="help"> Oh </ span>
    
</ Form>

[Example 4] When the user click to open the link id, id for the menu display blocks, and returns false to prevent the browser page is really for.

    
$ ("A # open"). Click (function () {
      
$ ("# Menu"). Show ();
      
return false;
    
});

May be acting similar to the following HTML:

    
<style type="text/css">
      
# Menu {display: none}
    
</ Style>
    
<a id="open" href="#"> control panel </ a>
    
<ul id="menu">
      
<li> <a href="#1"> Control Panel Home </ a> </ li>
      
<li> <a href="#2"> Edit Profile </ a> </ li>
      
<li> <a href="#3"> personal space management </ a> </ li>
    
</ Ul>

[Example 5] The block id for the menu screen of the dynamic effects of the following Club Fast Display:

    
$ ("# Menu"). SlideDown ("fast");

May be acting similar to the following HTML, the hidden dynamic drop-down menu will be displayed the way:

    
<style type="text/css">
      
# Menu {display: none}
    
</ Style>
    
<ul id="menu">
      
<li> <a href="#1"> Control Panel Home </ a> </ li>
      
<li> <a href="#2"> Edit Profile </ a> </ li>
      
<li> <a href="#3"> personal space management </ a> </ li>
    
</ Ul>

[Example 6] all the <div> changed to wide 300px, 20px width of text and border

    
$ ("Div"). Animate ({
        
width: '300px ',
        
padding: '20px '
      
}, 'Slow');

May be acting similar to the following HTML:

    
<div style="width: 100px; border: solid 1px red;">
      
Hello world!
    
</ Div>

PS. JQuery animate function of the core program elements of property does not change much, but through other plugin can provide more dynamic effect.

[Example 7] an example of the dynamic effects of the callback, all the <div> to hide the dynamic effects of 0.5 seconds, and then the dynamic effect of 0.5 seconds to display. hide () the second parameter is a callback function, where $ (this) was originally handled by the various elements of the program.

    
$ ("Div"). Hide (500, function () {
      
/ / $ (This) is each of the other <div>
      
$ (This). Show (500);
    
});

May be acting similar to the following HTML:

    
<div style="width: 100px; border: solid 1px red;">
      
Hello world!
    
</ Div>
    
<div style="width: 100px; border: solid 1px red;">
      
jsGears.com!
    
</ Div>

[Example 8] and find the file made sample.html all <div> fill under the floor of the original document <h1> the element id for the body

    
$ ("# Body"). Load ("sample.html div> h1");

This is a raw HTML:

    
<div id="body"> </ div>

sample.html fragments:

    
<div>
      
<h1> Hello world! </ h1>
      
<h2> This is H2 </ h2>
      
<h1> jsGears.com! </ h1>
    
</ Div>

After the implementation of the results of the code:

    
<div id="body">
      
<h1> Hello world! </ h1>
      
<h1> jsGears.com! </ h1>
    
</ Div>

[Example 9] through getJSON () to obtain information on JSON format and process data through the callback function

    
$. GetJSON ("test.json", function (data) {
      
for (var idx in data)
        
$ ("# Menu"). Append ("<li>" + data [idx] + "</ li>");
    
});

This is a raw HTML:

    
<ul id="menu">
      
<li> Item 1 </ li>
    
</ Ul>

test.json content:

    
[
      
"Hello world!",
      
"JsGears.com!"
    
]

After the implementation of the results of the code:

    
<ul id="menu">
      
<li> Item 1 </ li>
      
<li> Hello world! </ li>
      
<li> jsGears.com! </ li>
    
</ Ul>


[Continuous use function]

jQuery is a very important feature to continuously use the function (Chaining), when you select one or a group of elements, these elements can be more continuous treatment. The following example will hide all the <div>, change the text color to blue, then the effect of <div> the following screen is displayed Club:

    
$ ("Div"). Hide ();
    
$ ("Div"). Css ("color", "blue");
    
$ ("Div"). SlideDown ();

Three lines of code that can replace the following line of code, the result will be exactly the same:

    
$ ("Div"). Hide (). Css ("color", "blue"). SlideDown ();

It was very amazing? In the design of jQuery's architecture, most of the functions will be in processing the thing to do after the introduction of elements of the original and then return back to, so such a function can be followed by a continuous use. Remember at the outset of the jQuery can make your code more concise it? After reading some of the above examples, it should now be feeling a little bit.

Continuous use jQuery functions mentioned, there are two very important functions must be in this introduction. The first is the end (), this function is executed, will return "element found in the former group." The other is the find (), usage of this function as the use of $ () to find the elements of the document as a CSS selector into the implementation of the elements found after the return, the difference is $ () is to find the file, and find () is based on elements previously found elements find their bottom, like a re-filtering function.

    
$ ("Ul.open") / / [ul, ul, ul]
      
. Children ("li") / / [li, li, li]
      
. AddClass ("open") / / [li, li, li]
      
. End () / / [ul, ul, ul]
      
. Find ("a") / / [a, a, a]
      
. Click (function () {
        
$ (This). Next (). Toggle ();
        
return false;
      
}) / / [A, a, a]
      
. End (); / / [ul, ul, ul]

This piece of code above the continuous use of multiple functions, and through the end () and find () to respectively operate on different elements, detailed steps are explained as follows:


    
Find the file class to open all the <ul>
    
Under the layer of filtering out all the <li>
    
Add a class to these <li>
    
Back to previous search results, that is all <ul>
    
Then find the bottom of all <a>
    
Add an event handler for <a>
    
Back to previous search results



[Continued]

jQuery Basics of teaching this Hello, I hope to be helpful for beginners, if any misuse wrong place, I hope you feel free to correct me. Follow-up plan should be re-introduced a number of jQuery plugin useful, as a basis for the continuation of articles, so stay tuned.

Monday, January 24, 2011

PHP Tutorial: Pecl vs Pear VS pecl

email post
Reactions: 

PHP Tutorial: Pecl vs Pear vs PECL


"Pecl is a repository of PHP extensions, while
PEAR is a repository of PHP classes.

Extensions are written in C and included into PHP, while classes are written in PHP and included into your code.

Download and deploy php ext, office chair and supplies

Sunday, December 26, 2010

Upgrade ESX 4 Update 2 to ESX 4.1

email post
Reactions: 
Upgrade ESX 4 Update 2 to ESX 4.1

Problems with VUM (VMware Update Manager) lead me to upgrade our ESX 4 U2 hosts to ESX 4.1 using the command line. During the upgrade, I was getting an error about a certain rpm package that would not uninstall properly (esxupdate error 15), so I've included that as part of my instructions.

To prepare for the upgrade, you need to download the ESX pre-upgrade zip file as well as the 4.1 upgrade zip file. I used WinSCP to copy them to the /tmp directory on each ESX host, then put the hosts in maintenance mode using vCenter before doing the upgrade. The whole process is pretty quick once you've downloaded and staged the zip files.

Note these instructions assume you use sudo for admin tasks, if not, leave it out.

1. install pre-relase patch: sudo esxupdate update --bundle=/tmp/pre-upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip

2. install upgrade: sudo esxupdate update --bundle=/tmp/upgrade-from-ESX4.0-to-4.1.0-0.0.260247-release.zip

3. remove RPM from update 2 that won't remove autmatically (the first command checks to see if it is still installed, the second removes it if it is still there): sudo rpm -q vmware-esx-apps-4.0.0-2.17.261974 sudo rpm -e vmware-esx-apps-4.0.0-2.17.261974

4. reboot sudo reboot

5. Afterwards, you can log back in and check the host version: sudo vmware -v

Saturday, November 20, 2010

W.O.A.T. Tool OEM/KMS Activator

email post
Reactions: 
W.O.A.T. Tool OEM/KMS Activator  
WOAT Tool v2.0 - The Official Windows OEM/KMS Activation Tool.       By: Darkor Hellruins / FireAnt2010

About:
This tool its like a "MONSTER VERSION" of Opa Tool. It Checks for Widows Status, Activates Windows 7 via OEM or KMS Emulator.
Also Can rearm Widnows 7 and Server Editions forever like IR4 by timesurfer and Reset Windows 7 Editions Back to trial.

PS. Meaning of WOAT = W.indows O.EM A.ctivation T.ool

Release Notes:

    * Script cleaned and slightly updated.
    * Full Automatic Functions (OEM & KMS Activation)

Main Features:

    * Activation Status check.
    * OEM Activation (Slic 2.1 Only)
    * Reset Windows back to Trial and Install Default Key.
    * Rearm Forever. (Installation of Rearm Task Required).
    * KMS Activation. (VL Only)

Reset to Trial Supports:

    * Ultimate N & E
    * Enterprise N & E
    * Professional N & E
    * Home Premium N & E
    * Home Basic N & E
    * Starter N & E

Note: Will add support for all server edition from time to time...

Rearm Supported OS's

Windows 7 Editions:

    * Starter
    * Home Basic, E, N
    * Home Premium, E, N
    * Professional, E, N
    * Enterprise, E, N
    * Ultimate, E, N

Windows Server Editions:

    * Datacenter
    * Datacenter Core
    * Embedded Solution
    * Embedded Solution Core
    * Enterprise
    * Enterprise Core
    * Enterprise IA64
    * Essential Additional
    * Essential Additional SVC
    * Essential Management
    * Essential Management SVC
    * For SB Solutions
    * For SB Solutions EM
    * Home Premium
    * Home Standard
    * HPC
    * Hyper Core
    * Medium Business Management
    * Medium Business Messaging
    * Meduim Business Security
    * SBS Premium
    * SBS Premium Core
    * SBS Standard
    * Solution
    * Solution EM
    * Solution Premium
    * Solution Premium Core
    * Standard
    * Standard Core
    * Web
    * Web Core
    * Win Fundation
    * Win SB
    * Win SBV
    * Starter, E, N
    * Ultimate, E, N

OEM Activation Supported OS's:
"Slic v2.1 required"

    * Ultimate
    * Professional
    * HomePremium
    * HomeBasic
    * Starter

KMS Activation:

Windows 7 Editions:

    * Professional
    * Professional N
    * Professional E
    * Enterprise Edition
    * Enterprise Edition E
    * Enterprise Edition N

OEM Certs Available:

   1. ACER
   2. ACER NEW
   3. ADVENT (added)
   4. ALIENWARE
   5. ASUS
   6. ASUS NEW
   7. BENQ
   8. DELLDSGLTD
   9. EMACHINE-ACRSYS (added)
  10. EXPER-DATATE (added)
  11. FOUNDER
  12. FUJITSU
  13. FUJITSU-FSC
  14. FUJITSU-FSC (added-New)
  15. GATEWAY-EMACHINE
  16. GIGABYTE
  17. HAIER
  18. HASEE
  19. HCL-HCLINF (added)
  20. HEDY
  21. HP-COMPAQ
  22. HP-SERVER (added)
  23. IBM-LENOVO
  24. LG
  25. MEDION
  26. MSI
  27. NEC
  28. NOKIA (added)
  29. PACBEL
  30. QUANMAX (added)
  31. SAMSUNG
  32. SHARP
  33. SONY
  34. SONY NEW
  35. TCL
  36. TONGFANG-THTFPC (added)
  37. TOSHIBA
  38. TOSHIBA-TOSCPL
  39. TOSHIBA-TOSINV
  40. TOSHIBA-TOSQCI
  41. TSINGHUA-TONGFANG
  42. VILIV-YUTC (added)
  43. WORTMANN-WORTMA (added)

Thanks to:

    * Opa
    * Phazor
    * MasterDisaster
    * ancestor(v)
    * timesurfer
    * MDL Forum
    * and All of You

Release History:
Version 1.0 - Not release to the public.
Version 1.1 - Not release to the public.
Version 1.2 - Not release to the public.
Version 1.3 - Initial Release - 8/7/2010
Version 1.4 - Not release to the public. Bug Fixing - too many errors.
Version 1.5 - Not release to the public. Bug Fixing and Testing.
Version 1.6 Released - 8/12/2010 Added KMS Activation. New Certs.
Version 1.7 Released - 9/19/2010 More supporter OS's in Reset to Trial. Added Go to Validation Site. Added Activation Loop if activation fails.
Version 1.7.1 Released - 9/22/2010 - Fixed some typo mistakes that where causing errors. Fix Activation Loop code.
Version 1.7.3 Released- 9/23/2010 - Script updated, new cool features. - Fixed Release number in titles. Update Activation Loop new Code.
Version 1.7.4 Released - 9/28/2010 - Script Edited, More Automatic Features - Detect OS and Install proper key in all menus. Added Go to Support Site now open in Default browser.
Version 2.0 Released - 10/14/2010 - Full Updated and Full Automatic Functions.

Hash Calc: WOAT 2.0.EXE

Monday, November 15, 2010

Intel excusilve Win_PE Utility (Very rare ,useful and hard to find)

email post
Reactions: 
Intel Deployment Assistant Intel ® One-boot Flash Utility, Intel ® Embedded EFI and Microsoft Windows * Preboot Execution Environment (pre-boot execution environment, WinPE) firmware update package



Version:45;15;1_06       
Download
Date:01/04/2009    Status:Previously released
Size:6.97 MB    Language:English
Operating Systems:OS Independent
Detailed Description
This download contains BIOS and Firmware Update Package for use with the Intel® Deployment Assistant, Intel® One-boot Flash Utility, Intel® embedded EFI shell and Microsoft® Windows Preboot Execution Environment(WinPE).

This package may be used with:
 - Intel® Deployment Assistant 1.4 or later (on the CD or from support.intel.com)
 - Intel® One-boot Flash Update (OFU) v9.62 or later (support.intel.com)
 - the embedded EFI environment (see EFI_Update_Instructions.txt) or
 - Windows Preboot Execution Environment (WinPE) - availabe in WinPE folder.

ABOUT THIS RELEASE
BMC    : v15
FRUSDR : 1_06

Sunday, November 14, 2010

"WOAT Tool" v2.0: The Official Windows OEM/KMS Activation Tool

email post
Reactions: 


WOAT Tool v2.0 - The Official Windows OEM/KMS Activation Tool.       By: Darkor Hellruins / FireAnt2010
About:
This tool its like a "MONSTER VERSION" of Opa Tool. It Checks for Widows Status, Activates Windows 7 via OEM or KMS Emulator.
Also Can rearm Widnows 7 and Server Editions forever like IR4 by timesurfer and Reset Windows 7 Editions Back to trial.
PS. Meaning of WOAT = W.indows O.EM A.ctivation T.ool
Release Notes:
    * Script cleaned and slightly updated.
    * Full Automatic Functions (OEM & KMS Activation)
Main Features:
    * Activation Status check.
    * OEM Activation (Slic 2.1 Only)
    * Reset Windows back to Trial and Install Default Key.
    * Rearm Forever. (Installation of Rearm Task Required).
    * KMS Activation. (VL Only)
Reset to Trial Supports:
    * Ultimate N & E
    * Enterprise N & E
    * Professional N & E
    * Home Premium N & E
    * Home Basic N & E
    * Starter N & E
Note: Will add support for all server edition from time to time...
Rearm Supported OS's
Windows 7 Editions:
    * Starter
    * Home Basic, E, N
    * Home Premium, E, N
    * Professional, E, N
    * Enterprise, E, N
    * Ultimate, E, N
Windows Server Editions:
    * Datacenter
    * Datacenter Core
    * Embedded Solution
    * Embedded Solution Core
    * Enterprise
    * Enterprise Core
    * Enterprise IA64
    * Essential Additional
    * Essential Additional SVC
    * Essential Management
    * Essential Management SVC
    * For SB Solutions
    * For SB Solutions EM
    * Home Premium
    * Home Standard
    * HPC
    * Hyper Core
    * Medium Business Management
    * Medium Business Messaging
    * Meduim Business Security
    * SBS Premium
    * SBS Premium Core
    * SBS Standard
    * Solution
    * Solution EM
    * Solution Premium
    * Solution Premium Core
    * Standard
    * Standard Core
    * Web
    * Web Core
    * Win Fundation
    * Win SB
    * Win SBV
    * Starter, E, N
    * Ultimate, E, N
OEM Activation Supported OS's:
"Slic v2.1 required"
    * Ultimate
    * Professional
    * HomePremium
    * HomeBasic
    * Starter
KMS Activation:
Windows 7 Editions:
    * Professional
    * Professional N
    * Professional E
    * Enterprise Edition
    * Enterprise Edition E
    * Enterprise Edition N
OEM Certs Available:
   1. ACER
   2. ACER NEW
   3. ADVENT (added)
   4. ALIENWARE
   5. ASUS
   6. ASUS NEW
   7. BENQ
   8. DELLDSGLTD
   9. EMACHINE-ACRSYS (added)
  10. EXPER-DATATE (added)
  11. FOUNDER
  12. FUJITSU
  13. FUJITSU-FSC
  14. FUJITSU-FSC (added-New)
  15. GATEWAY-EMACHINE
  16. GIGABYTE
  17. HAIER
  18. HASEE
  19. HCL-HCLINF (added)
  20. HEDY
  21. HP-COMPAQ
  22. HP-SERVER (added)
  23. IBM-LENOVO
  24. LG
  25. MEDION
  26. MSI
  27. NEC
  28. NOKIA (added)
  29. PACBEL
  30. QUANMAX (added)
  31. SAMSUNG
  32. SHARP
  33. SONY
  34. SONY NEW
  35. TCL
  36. TONGFANG-THTFPC (added)
  37. TOSHIBA
  38. TOSHIBA-TOSCPL
  39. TOSHIBA-TOSINV
  40. TOSHIBA-TOSQCI
  41. TSINGHUA-TONGFANG
  42. VILIV-YUTC (added)
  43. WORTMANN-WORTMA (added)
Thanks to:
    * Opa
    * Phazor
    * MasterDisaster
    * ancestor(v)
    * timesurfer
    * MDL Forum
    * and All of You
Release History:
Version 1.0 - Not release to the public.
Version 1.1 - Not release to the public.
Version 1.2 - Not release to the public.
Version 1.3 - Initial Release - 8/7/2010
Version 1.4 - Not release to the public. Bug Fixing - too many errors.
Version 1.5 - Not release to the public. Bug Fixing and Testing.
Version 1.6 Released - 8/12/2010 Added KMS Activation. New Certs.
Version 1.7 Released - 9/19/2010 More supporter OS's in Reset to Trial. Added Go to Validation Site. Added Activation Loop if activation fails.
Version 1.7.1 Released - 9/22/2010 - Fixed some typo mistakes that where causing errors. Fix Activation Loop code.
Version 1.7.3 Released- 9/23/2010 - Script updated, new cool features. - Fixed Release number in titles. Update Activation Loop new Code.
Version 1.7.4 Released - 9/28/2010 - Script Edited, More Automatic Features - Detect OS and Install proper key in all menus. Added Go to Support Site now open in Default browser.
Version 2.0 Released - 10/14/2010 - Full Updated and Full Automatic Functions.
Hash Calc:


Sunday, November 07, 2010

Fileserve download Tutorial

email post
Reactions: 

How to Download from fileserve.com